Home (maison)

Imprimante

Imprimante : http://imprimante.local/

Re-init Dell C1765nfw
  1. turn off the printer.
  2. turn running all by pressing the left, right and Menu keys.
  3. release the keys when “This Mode” and “Password” appears.
  4. press arrow up twice and press Select (or box).
  5. “this Mode”, “Printer”, and “FAX/Scanner” appear. (Entered in CE Diag mode..)
  6. press Select (check) “printer”.
  7. Press down to “IOT Diag” and press Check.
  8. Press down “Set of Installation” and press on check.
  9. Press down to ‘clear all NVM ‘.
  10. press Select (checkmark) twice to run the test.
  11. power cycle the printer back to the normal operating mode. (this should occur automatically)

Switch POE Netgear

http://poe-home.absurde.org

Home Assistant (Serveur domotique)

https://home.absurde.org:8123 / https://reju.absurde.org

Accès restreint : ssh root@homeassistant.local / 192.168.1.2

Accès total : ssh root@homeassistant.local -p 22222 / 192.168.1.2

Problème de certificat SSL

ssh root@192.168.1.2
vi config/integrations/http.yaml
  [...]
  #ssl_certificate: /ssl/fullchain.pem
  #ssl_key: /ssl/privkey.pem
ha core restart

Livebox

Accès distant : https://home.absurde.org:10000

Accès local : http://192.168.1.254

Unifi

https://home.absurde.org:8443/

Serveur Multimedia

Jellyfin : https://jellyfin.absurde.org/
Jellyseer : https://jellyseerr.absurde.org/
Radarr : https://radarr.absurde.org/
Sonarr : https://sonarr.absurde.org/
QBitorrent : https://qbittorrent.absurde.org/
Prowlarr : https://prowlarr.absurde.org

Mise à jour

docker compose pull [prowlarr]
docker compose up --force-recreate --build -d [prowlarr]
docker image prune -f

Creality K1 MAX

Mise à jour

Restaurer les paramètres usine :

ssh root@192.168.1.245 (password: creality_2023)
echo "all" | nc -U /var/run/wipe.sock
ok

Copier le firmware (par exemple CR4CU220812S11_ota_img_V1.3.3.36.img) sur une clef USB et la brancher sur l’imprimante.

Faire la mise à jour et la phase de calibration.

Activer l’accès SSH

Aller dans Système > Information compte root

Helper script

Installation :

git clone https://github.com/Guilouz/Creality-Helper-Script.git /usr/data/helper-script

Installer Moonraker & Nginx :

sh /usr/data/helper-script/helper.sh
	choix 1 puis choix 1

Installer Fluidd :

sh /usr/data/helper-script/helper.sh
	choix 1 puis choix 2

Installer Entware (nécessaire pour Moonraker Timelapse)

sh /usr/data/helper-script/helper.sh
	choix 1 puis choix 4

Installer Mooraker Timelapse :

sh /usr/data/helper-script/helper.sh
	choix 1 puis choix 16

Activer la caméra :

sh /usr/data/helper-script/helper.sh
       choix 5 puis choix 4